Dell Inspiron 3582 Service Manual - Page 73

Removing the system board, Prerequisites, Procedure, after you replace the system board.

Get Dell Inspiron 3582 PDF manuals and user guides View all Dell Inspiron 3582 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

38 Removing the system board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect the cables correctly after you replace the system board. Prerequisites 1 Remove the optical drive (optional). 2 Remove the base cover. 3 Remove the battery. 4 Remove the memory modules. 5 Remove the wireless card. 6 Remove the solid-state drive/Intel Optane. 7 Remove the thermal plate. Procedure 1 Disconnect the power-adapter port cable from the system board. 2 Disconnect the speaker cable from the system board. 3 Open the latch and disconnect the keyboard from the system board. 4 Open the latch and disconnect the keyboard back-light cable from the system board. 5 Open the latch and disconnect the touchpad cable from the system board. 6 Open the latch and disconnect the hard-drive cable from the system board. 7 Open the latch and disconnect the I/O board cable from the system board. 8 Open the latch and disconnect the finger-print reader cable from the system board. 9 Lift the latch and disconnect the optical-drive connector-board cable from the system board (optional). 10 Lift the latch and disconnect the optical-drive connector-board cable from the palm rest and keyboard assembly (optional). 11 Lift the optical-drive connector board along with the cable off the palm rest and keyboard assembly ((optional). 12 Open the latch and disconnect the display cable from the system board. 13 Open the latch and disconnect the power-button board cable from the system board. Removing the system board 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Removing the system board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After working inside
your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
NOTE:
Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program
after you replace the system board.
NOTE:
Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must
make the appropriate changes again after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect
the cables correctly after you replace the system board.
Prerequisites
1
Remove the
optical drive
(optional).
2
Remove the
base cover
.
3
Remove the
battery
.
4
Remove the
memory modules
.
5
Remove the
wireless card
.
6
Remove the
solid-state drive/Intel Optane
.
7
Remove the
thermal plate
.
Procedure
1
Disconnect the power-adapter port cable from the system board.
2
Disconnect the speaker cable from the system board.
3
Open the latch and disconnect the keyboard from the system board.
4
Open the latch and disconnect the keyboard back-light cable from the system board.
5
Open the latch and disconnect the touchpad cable from the system board.
6
Open the latch and disconnect the hard-drive cable from the system board.
7
Open the latch and disconnect the I/O board cable from the system board.
8
Open the latch and disconnect the
finger-print
reader cable from the system board.
9
Lift the latch and disconnect the optical-drive connector-board cable from the system board (optional).
10
Lift the latch and disconnect the optical-drive connector-board cable from the palm rest and keyboard assembly (optional).
11
Lift the optical-drive connector board along with the cable
off
the palm rest and keyboard assembly ((optional).
12
Open the latch and disconnect the display cable from the system board.
13
Open the latch and disconnect the power-button board cable from the system board.
38
Removing the system board
73