D-Link DIR-890L/R User Manual - Page 73

Section 3 - Configuration IPv6 To configure IPv6 rules, from the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a route, click on its trash can icon in the Delete column. If you wish to edit a route click on its pencil icon in the Edit column. If you wish to create a new route, click the Add Route button. Click Save when you are done. When you click on Add Route, the Create New Route window will open. Enter the required information into the fields described below: Name: Enter a Name for the new rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the packets that will take this route. Gateway: Enter the gateway address for this rule here. Metric: Enter the metric value for this rule here. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-890L User Manual 68