BenQ W1090 User Manual - Page 64
Advanced, System Setup : Advanced, Reset, Lamp Timer, Basic, Reset Lamp Timer, Settings
View all BenQ W1090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
9. Tighten the screws that secure the lamp. 10. Ensure the handle is fully laid flat and locked in place. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 11. Replace the lamp compartment cover on the projectorand tighten the captive screw. 12. Restart the projector. Do not turn the power on with the lamp cover removed. Resetting the lamp timer 13. After the startup logo displays, resetting the lamp timer via the OSD menu. • Under the Advanced OSD menu, go to System Setup : Advanced > Reset Lamp Timer, and select Reset. • Under the Basic OSD menu, if there's no signal connected to the projector, go to Reset Lamp Timer and select Reset; if there are signals connected, go to Settings > Reset Lamp Timer, and select Reset. Do not reset if the lamp is not new or replaced as this could cause damage. A "Reset Successfully" message displays to notify that the lamp time has been reset to "0". 64 Maintenance