BenQ W1090 User Manual - Page 55
Shutting down the projector
View all BenQ W1090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Shutting down the projector 1. To turn the projector off, press on the remote control to turn projector off directly. Or you can press POWER on the projector and a warning message appears. Press POWER again. 2. Once the cooling process finishes, the POWER indicator light is a steady orange and fans stop. 3. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. • To protect the lamp, the projector will not respond to any commands during the cooling process. • To shorten the cooling time, you can also activate the Quick Cooling function. See "Quick Cooling" on page 52 for details. • If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press POWER again to start the projector after the fans stop and the POWER indicator light turns orange. • Lamp life results will vary depending on environmental conditions, and usage. Menu Functions 55