2012 Yamaha Motorsports RS Venture Owners Manual - Page 82

2012 Yamaha Motorsports RS Venture Manual

Page 82 highlights

Periodic maintenance and adjustment 5. 6. Place the air filter element frame in the original position. Install the air filter case cover and attach the air filter case by hooking all the fasteners. Close the shroud. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud and the top cover. (See page 63 for removal procedures.) Remove the headlight unit bolt and the windshield stay bolts on each side of the snowmobile. 1 7. 1. 2. 3. RST90PGT 1. Headlight unit 5. Remove the air filter case cover by unhooking the fasteners. 1 2 1 1. Air filter case cover fastener 1. Headlight unit bolt 2. Windshield stay bolt 1 6. 4. Unhook the headlight unit as shown, then lift it up and move it rearward, away from the air filter case cover. NOTICE: Be careful not to scratch the snowmobile when moving the headlight unit. [ECS00920] Lift up the air filter element frame and check the air filter element. If there is any snow on the air filter element, remove the element, brush off the snow, and then install the air filter element. 1 1. Air filter element frame 76

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142

Periodic maintenance and adjustment
76
5.
Place the air filter element frame in the
original position.
6.
Install the air filter case cover and attach
the air filter case by hooking all the fas-
teners.
7.
Close the shroud.
RST90PGT
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Remove the shroud and the top cover.
(See page 63 for removal procedures.)
3.
Remove the headlight unit bolt and the
windshield stay bolts on each side of the
snowmobile.
4.
Unhook the headlight unit as shown, then
lift it up and move it rearward, away from
the air filter case cover.
NOTICE:
Be
careful not to scratch the snowmobile
when moving the headlight unit.
[ECS00920]
5.
Remove the air filter case cover by un-
hooking the fasteners.
6.
Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
1.
Headlight unit bolt
2.
Windshield stay bolt
1
2
1.
Headlight unit
1.
Air filter case cover fastener
1.
Air filter element frame
1
1
1
1