2011 Yamaha Motorsports RS Vector GT Owners Manual - Page 93
2011 Yamaha Motorsports RS Vector GT Manual
Page 93 highlights
Periodic maintenance and adjustment Remove the shroud, the right side cover, and the top cover (RST90GT), or open the shroud (RST90). [See page 63 (RST90GT) or page 67 (RST90) for the procedures.] 3. Remove the coolant reservoir cap and add coolant until it reaches the "COLD LEVEL" mark. RST90 2. RST90GT 1. "COLD LEVEL" mark 2. Coolant reservoir cap Recommended antifreeze: High-quality ethylene glycol antifreeze containing corrosion inhibitors Antifreeze and water mixing ratio: 3:2 Total amount: RST90 5.40 L (5.71 US qt, 4.75 Imp.qt) RST90GT 5.40 L (5.71 US qt, 4.75 Imp.qt) 4. Start the engine and add coolant until the coolant level stabilizes, and then stop the engine. Check for any coolant leakage. If coolant is leaking, check for the cause. RST90GT 5. 1 2 TIP If you find any leaks, consult a Yamaha dealer. 6. Fill the coolant reservoir with coolant until it reaches the "COLD LEVEL" mark. Install the coolant reservoir cap. Install the top cover, the right side cover, and the shroud (RST90GT), or close the shroud (RST90). 1. "COLD LEVEL" mark 2. Coolant reservoir cap RST90 7. 8. 87