2011 Yamaha Motorsports RS Vector GT Owners Manual - Page 22
2011 Yamaha Motorsports RS Vector GT Manual
Page 22 highlights
Control functions a tachometer an odometer G a tripmeter (which shows the distance traveled since it was last set to zero) G warning indicators (which show engine trouble, coolant temperature, fuel level, and oil level warnings) G indicator lights (which show high beam and low coolant temperature conditions) G a warning light (which shows warnings together with the warning indicators) G a fuel meter (which shows the fuel remaining in the fuel tank) G a grip/thumb warmer level indicator (which shows the grip warmer level or the thumb warmer level) After the engine is started, the tachometer needle makes one sweep, and the low coolant temperature indicator light, the warning light, and all segments of the meter unit display come on and go off. G G TIP To switch the speedometer, odometer, and tripmeter displays between kilometers and miles, select the odometer mode "ODO", and then push the select/reset button for at least 10 seconds while the snowmobile is stopped. Odometer and tripmeter modes Pushing the select/reset button switches the display between the odometer mode "ODO" and the tripmeter mode "TRIP" in the following order: ODO → TRIP → ODO 1 1. Odometer/tripmeter 1 2345 6 7 To reset the tripmeter, push the select/reset button for at least 1 second while the tripmeter is displayed. ESU10411 High beam indicator light " " 1. Tachometer 2. Low coolant temperature indicator light " " 3. High beam indicator light " " 4. Warning light " " 5. Warning indicators 6. Meter display 7. Select/reset button The high beam indicator light comes on when the high beams of the headlights are switched on. (See page 23 for headlight beam switch operation.) The grip warmer level is initially displayed for 5 seconds, then the display switches to the fuel meter. 16