2011 Yamaha Motorsports RS Vector GT Owners Manual - Page 111
2011 Yamaha Motorsports RS Vector GT Manual
Page 111 highlights
Periodic maintenance and adjustment 1 1 2 1. Headlight coupler 2. Bulb holder cover 1. Do not touch the glass part of the bulb. 4. Unhook the bulb holder, and then remove the burnt-out bulb. 6. 7. 1. 2. Bulb type: Halogen bulb Install the bulb holder cover, and then connect the headlight coupler. Close the shroud. Remove the shroud and the top cover. (See page 63 for removal procedures.) Remove the headlight unit bolt and the windshield stay bolts on each side of the snowmobile. RST90GT 1. Bulb holder 5. Install a new bulb, and then hook the bulb holder onto the headlight unit. NOTICE: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. [ECS00621] 2 1 1. Headlight unit bolt 2. Windshield stay bolt 3. Unhook the headlight unit as shown, then lift it up and move it forward, away from the handlebar. NOTICE: Be careful not to scratch the snowmobile when moving the headlight unit. [ECS00920] 105