2011 Yamaha Motorsports RS Vector GT Owners Manual - Page 77
2011 Yamaha Motorsports RS Vector GT Manual
Page 77 highlights
Periodic maintenance and adjustment 3. 4. Loosen the locknut. To increase the throttle lever free play, turn the adjusting bolt in direction (a). To decrease the throttle lever free play, turn the adjusting bolt in direction (b). 4. Unhook the headlight unit as shown, then lift it up and move it forward, away from the handlebar. NOTICE: Be careful not to scratch the snowmobile when moving the headlight unit. [ECS00920] (b) (a) 1 2 1 3 1. Locknut 2. Throttle lever free play adjusting bolt 3. Throttle lever free play 1. Headlight unit 5. 6. Throttle lever free play: 2.0-3.0 mm (0.08-0.12 in) 5. 6. 1. 2. 3. Tighten the locknut. Close the shroud. Place the snowmobile on a level surface and apply the parking brake. Remove the shroud and the top cover. (See page 63 for removal procedures.) Remove the headlight unit bolt and the windshield stay bolts on each side of the snowmobile. Loosen the locknut. To increase the throttle lever free play, turn the adjusting bolt in direction (a). To decrease the throttle lever free play, turn the adjusting bolt in direction (b). RST90GT (b) (a) 2 1 3 1. Locknut 2. Throttle lever free play adjusting bolt 3. Throttle lever free play 2 Throttle lever free play: 2.0-3.0 mm (0.08-0.12 in) 1 7. 8. 1. Headlight unit bolt 2. Windshield stay bolt Tighten the locknut. Install the headlight unit, making sure to fit the slots on its bottom onto the projections on its stay. 71