2011 Yamaha Motorsports RS Vector GT Owners Manual - Page 48
2011 Yamaha Motorsports RS Vector GT Manual
Page 48 highlights
Control functions ESU14010 Adjusting the rebound damping force of the rear shock absorber (RS90GT / RS90LTGT) EWS00161 WARNING Do not turn the remote adjusting dial while the snowmobile is moving as this could cause loss of control, an accident, and injury. ECS00291 Rebound damping setting: Minimum (soft): 11 click(s) in direction (b)* Standard: Adjusting dial aligned with standard position match mark Maximum (hard): 11 click(s) in direction (a)* * With the adjusting dial in the standard position ESU13290 NOTICE Be sure to stop the remote adjusting dial at a marked position around the dial where there is a click. The rebound damping force can be adjusted by turning the rear shock absorber damping force remote adjusting dial. To increase the rebound damping force, turn the adjusting dial in direction (a). To decrease the rebound damping force, turn the adjusting dial in direction (b). Adjusting the compression damping force of the rear shock absorber (RST90GT) The compression damping force can be adjusted by turning the adjusting knob. To increase the compression damping force, turn the adjusting knob in direction (a). To decrease the compression damping force, turn the adjusting knob in direction (b). NOTICE: Do not continue to turn the adjusting knob in direction (a) after it stops. The shock absorber could be damaged and damping force adjustments will not be able to be made. Do not turn the adjusting knob in direction (b) more than click(s). Even if the adjusting knob is continually turned after click(s), there will be no change in the damping force. Be sure to stop the adjusting knob at a position where there is a click. [ECS00910] (b) 1 2 (a) 1. Rear shock absorber damping force remote adjusting dial 2. Standard position (b) (a) 1 1. Compression damping force adjusting knob 42