2002 Yamaha Motorsports VK 540 lll Owners Manual - Page 60

2002 Yamaha Motorsports VK 540 lll Manual

Get 2002 Yamaha Motorsports VK 540 lll PDF manuals and user guides View all 2002 Yamaha Motorsports VK 540 lll manuals

Page 60 highlights

1 Deflection 2 100 N {10 kg (22 lb)} Standard track deflection: 35 ~ 45 mm (1.38 ~ 1.77 in)/100 N {10 kg (22 lb)} 820-003 3. If the deflection is incorrect, adjust the track. Track Adjustment WARNING • • • Be sure this adjustment is made by a Yamaha dealer. Support the machine securely on a suitable stand before working underneath the machine. Operate the engine in a well-ventilated area. 1. Lift the rear of the machine onto a suitable stand to raise the track off the ground. 2. Loosen the rear axle nut 1. 820-004 NOTE: It is not necessary to remove the cotter pin 2. 3. Start the engine and rotate the track one or two turns. Stop the engine. 4. Check the track alignment with the slide runner 3. If the alignment is incorrect, turn the left and right adjusters to adjust. 820-008 8-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
8-19
820-003
1
Deflection
2
100 N {10 kg (22 lb)}
Standard track deflection:
35 ~ 45 mm (1.38 ~ 1.77 in)/100 N {10 kg (22 lb)}
3. If the deflection is incorrect, adjust the track.
Track Adjustment
WARNING
•
Be sure this adjustment is made by a Yamaha
dealer.
•
Support the machine securely on a suitable stand
before working underneath the machine.
•
Operate the engine in a well-ventilated area.
1.
Lift the rear of the machine onto a suitable stand to raise
the track off the ground.
2. Loosen the rear axle nut
1
.
NOTE:
It is not necessary to remove the cotter pin
2
.
3. Start the engine and rotate the track one or two turns.
Stop the engine.
4. Check the track alignment with the slide runner
3
.
If the alignment is incorrect, turn the left and right adjusters
to adjust.
820-004
820-008