2002 Yamaha Motorsports VK 540 lll Owners Manual - Page 58

2002 Yamaha Motorsports VK 540 lll Manual

Get 2002 Yamaha Motorsports VK 540 lll PDF manuals and user guides View all 2002 Yamaha Motorsports VK 540 lll manuals

Page 58 highlights

ESU00197 FULL RATE ADJUSTER The total suspension spring rate and damping characteristics can be adjusted by changing the installed position of the shock-absorber assembly. WARNING Be sure this adjustment is made by a Yamaha dealer. Installation position Spring rate and damping Standard C Hard B Medium A A Soft NOTE: Be sure to make this adjustment when there is no load (rider or cargo) on the snowmobile. 1. Loosen the nut 1 1/2 or 3/4 turns, while holding the adjusting bolt 2 securely with a wrench so it does not move. 820-102 CAUTION: Never allow the adjusting bolt 2 to move while loosening the nut. 2. Turn the adjusting bolt 2 to the desired position. 820-088 CAUTION: Be sure the adjusting bolt ends are set at the same position on each side. 3. While holding the adjusting bolt securely, tighten the nut 1. 820-087 Nut tightening torque: 49 Nm (4.9 m·kg, 35.4 ft·lb) CAUTION: Never allow the adjusting bolt to move while tightening the nut. 8-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
8-17
ESU00197
FULL RATE ADJUSTER
The total suspension spring rate and damping character-
istics can be adjusted by changing the installed position of
the shock-absorber assembly.
WARNING
Be sure this adjustment is made by a Yamaha dealer.
C
B
A
Hard
Medium
Soft
A
Installation position
Spring rate and damping
Standard
820-102
820-088
820-087
NOTE:
Be sure to make this adjustment when there is no load
(rider or cargo) on the snowmobile.
1. Loosen the nut
1
1/2 or 3/4 turns, while holding the
adjusting bolt
2
securely with a wrench so it does not
move.
CAUTION
:
Never allow the adjusting bolt
2
to move while loosen-
ing the nut.
2. Turn the adjusting bolt
2
to the desired position.
CAUTION
:
Be sure the adjusting bolt ends are set at the same
position on each side.
3.
While holding the adjusting bolt securely, tighten the nut
1
.
Nut tightening torque:
49 Nm (4.9 m·kg, 35.4 ft·lb)
CAUTION
:
Never allow the adjusting bolt to move while tighten-
ing the nut.