2012 Volvo XC70 Owner's Manual - Page 93

03 Your driving environment Lighting NOTE ABL is activated automatically1 when the engine is started. The function can be deactivated/reactivated in the MY CAR menu system under My XC70 Active Bending Lights or under Settings Car settings Light settings Active Bending Lights. See page 131 for a description of the menu system. Symbol Display Headlamp failure Service required • • The use of daytime running lights is mandatory in Canada. Continuous high beams cannot be activated when the headlight switch is in position . High beam flash will function in this position. Explanation The system is not functioning properly and should be inspected/ repaired by a trained and qualified Volvo service technician. 03 Active Bending Lights (ABL)* NOTE This function is only active in twilight or dark conditions, and only when the vehicle is in motion. If a fault should occur in the system, the symbol will illuminate and a message will be displayed as shown in the table. Headlight pattern with the Active Bending Light function deactivated (left) and activated (right) When this function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration). 1 The factory default setting is on. `` * Option/accessory, for more information, see Introduction. 93