2012 Volvo XC70 Owner's Manual - Page 92

03 Your driving environment Lighting Lighting panel High/low beam headlights High/low beam headlights Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low beams (this also applies on models equipped with the optional Active Bending Lights). > The symbol illuminates in the Headlight switch and lever 03 G022854 Overview, light switches instrument panel to indicate that the high beams are on. Thumb wheel for adjusting display and instrument lighting Rear fog light Front fog lights Headlights/parking lights High beam flash Toggle between high and low beams Daytime running lights/high beams/high beam flash Parking lights Low beams/high beams/high beam flash Low beams When the engine is started, the low beams are activated automatically (daytime running lights) if the headlight control is in position 0 or . Daytime running lights can be deactivated in the MY CAR menu system under Settings Car settings Light settings Daytime running lights. However, please be aware that these lights may not be deactivated in Canada. Instrument lighting Illumination of the display and instrument lights will vary, depending on ignition mode. The display lighting is automatically subdued in darkness and the sensitivity is set with the thumb wheel. The intensity of the instrument lighting is adjusted with the thumb wheel. High beam flash Move the lever toward the steering wheel to position 1. The high beams come on until the lever is released. 92