2012 Volvo XC70 Owner's Manual - Page 113
2012 Volvo XC70 Manual
Page 113 highlights
03 Your driving environment Starting the engine Switching off the engine With the engine running, press the START/ STOP ENGINE button. If the gear selector is not in the P position or if the vehicle is moving, press the button twice or press and hold it in until the engine switches off. To jump start your vehicle: 1. Switch off the ignition (set the ignition to mode 0, see page 82). 2. First connect the red jumper cable to the auxiliary battery's positive (+) terminal (1). 3. Fold back the cover over the positive (+) terminal on your vehicle's battery (2), marked with a "+" sign, located under a folding cover. 4. Connect the black jumper cable to the auxiliary battery's negative (-) terminal (3) and to the ground point in your vehicle's engine compartment (right engine mount at the top, on the outer screw) (4). 5. Start the engine in the assisting vehicle, then start the engine in the vehicle with dead battery. 6. After the engine has started, first remove the negative (-) terminal jumper cable (black). Then remove the positive (+) terminal jumper cable (red). G021347 WARNING PROPOSITION 65 WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the state of California to cause cancer and reproductive harm. Wash hands after handling. 03 Jump starting CAUTION Connect the jumper cables carefully to avoid short circuits with other components in the engine compartment. Connecting the jumper cables Follow these instructions to jump start your vehicle's dead battery or to jump start another vehicle's dead battery using your vehicle. If the 12-volt auxiliary battery to be used is in another vehicle, check that the vehicles are not touching to prevent premature completion of a circuit. Be sure to follow jump starting instructions provided for the other vehicle. `` 113