2012 Volvo XC70 Owner's Manual - Page 60

02 Locks and alarm Remote key and key blade Opening the remote key/PCC 02 PCC (two batteries) 1. Use a screwdriver to pry out the old batteries. 2. Insert the first new battery with the (+) side upward. 3. Insert the plastic spacer over the battery. Insert the second new battery on top of the plastic spacer, with the + side downward. Slide the spring loaded catch to the side. Pull the key blade straight out of the remote key. Insert a small screwdriver in the hole behind the spring loaded catch and carefully pry up the cover. Re-assembling the remote key NOTE Turn the remote key with the buttons upward so that the batteries do not fall out when the cover is removed. 1. Press the remote key's cover into place. 2. Hold the remote key with the slot for the key blade up. 3. Carefully slide the key blade into its groove. 4. Gently press the key blade in the groove until it clicks into place. Old batteries should be properly recycled. Replacing the batteries CAUTION When handling batteries, avoid touching their contact surfaces as this could result in poor battery function in the remote key. Note the position of the battery's (+) or (-) sides. Remote key (one battery) Battery type CR 2430, 3 V (one battery in the remote key, two batteries in the PCC) 1. Use a screwdriver to pry out the old battery. 2. Insert a new one with the (+) side downward. 60