2012 Volvo XC70 Owner's Manual - Page 85

03 Your driving environment Seats Power seat* NOTE Programming the memory Three different seating and door mirror positions can be stored in the driver seat's memory. The following example explains how button (1) can be programmed. Buttons (2) and (3) are programmed in the same way. To program (store) a seat position and door mirror position in button (1): 1. Move the seat (and door mirrors) to the desired position using the seat and mirror adjustment controls. 2. Press and hold down the memory button (4). 3. With the memory button depressed, press button (1) briefly to store the current position for the seat/mirrors. To move the seat and mirrors to the position that they were in when a button was programmed: ± Press and hold down button (1) until the seat and mirrors stop moving. • • Only one of the power seat's controls can be used at the same time. The power seats have an overload protector that activates if a seat is blocked by any object. If this occurs, switch off the ignition (key in position 0) and wait for a short period before operating the seat again. 03 Seat with memory function Front edge of seat cushion up/down Seat forward/rearward and up/down Backrest tilt Operation The seats can be adjusted for a short period after unlocking the door with the remote control without the key in the ignition slot. Seat adjustment is normally made when the ignition is on and can always be made when the engine is running. Stored seat position Stored seat position Stored seat position Memory button NOTE As a safety precaution, the seat will stop automatically if the button is released before the seat has reached the preset position. `` * Option/accessory, for more information, see Introduction. 85