2003 Oldsmobile Aurora Owner's Manual - Page 317

Wood Panels Use a clean cloth moistened in warm, soapy water (use mild dish washing soap). Dry the wood immediately with a clean cloth. Care of Safety Belts Keep belts clean and dry. Glass Surfaces Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. See GM Vehicle Care/Appearance Materials on page5-88. Do not bleach or dye safetybelts. If you do, it may severely weaken them. In a crash, they might not be able to provideadequate protection. Clean safety belts only with mild soap and lukewarm water. Notice: Don't use abrasive cleaners on glass, because they may cause scratches. Avoid placing decals on the inside rear window, since they may have to be scraped off later. If abrasive cleaners Weatherstrips are used on the inside of the rear window, an electric defogger element may bedamaged. Any temporary license should not be attached across the Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak. Apply defogger grid. silicone grease with a clean cloth at least every six months. During very cold, damp weather more frequent application may be required. See Part D: Recommended Fluids and Lubricants on page 6- 15. 5-84