2003 Oldsmobile Aurora Owner's Manual - Page 125

Resuming a Set Speed Setting the cruise control at a desired speed and then applying the brake will end the cruise control function. Once you're going about 25 mph (40 km/h) or more, you can briefly push the cruise control lever up to RES-ACC (Resume-Accelerate)to reset. This returns you to the desired preset speed. Remember, if you hold the lever up at RES-ACC, the vehicle will accelerate until you release the lever or apply the brake. So unless you want to go faster, don't hold the lever at RES-ACC. Increasing Speed While Using Cruise Control 1. Push the cruise control switch, located on the right side of the steering column at the end of the lever, in to ON. There are three ways to go to a higher speed: Use the accelerator pedal to go to a higher speed. Push the lever down, then release the lever and the accelerator pedal. You'll now cruise at the higher speed. Move the cruise lever up to RES-ACC. Hold it there until you reach a desired speed and then release the lever. 2. Get up to the speed you want. 3. Push the lever down to SET-CST (Coast) and release it. The CRUISE light on the instrument panel cluster will come on. 4. Take your foot off the accelerator pedal. 3-1 2