1996 Oldsmobile Bravada Owner's Manual - Page 246
1996 Oldsmobile Bravada Manual
Page 246 highlights
Front Reading Lamps 1. Use a coin or small screwdriver to unscrew the center of the overhead console lamplens while pressing in on the lamp assembly. 2. Remove the lamp assembly from the console. Vanity Mirror Lamps 1. Insert the blade of a small screwdriver into the center slot at the bottom of the lens. 2. Gently pry the screwdriver down in order to lift out the lens. 3. Pry out the bulb. 3. Remove the bulb assembly from the lamp assembly. 4. Pull the bulb straight out of the base. 5. Put a new bulb into the bulb base. 4. Press the new bulb into place. 5. Slide the side tabs of the lens under the side of the vanity assembly frame. 6. Rotate the lens downward. 6. Install the bulb assembly into the lamp assembly. 7. Place the lamp assembly into the console, turning it to latch it in place. 8. Install the lens. 7. Snap the lens into the frame. 6-34