1995 Oldsmobile Silhouette Owner's Manual - Page 303

Using Foam-Type Cleaner on Fabric 0 0 Vacuum and brush the area toremove any loose dirt. Always clean a whole trim panel or section. Mask surrounding trim along stitch or welt lines. i NOTICE: Be careful. A blow dryer or a heat lamp may scorch the fabric. Wipe with a clean cloth. 0 Mix Multi-Purpose Powdered Cleaner following the directions on the container label. Use suds only and apply with a clean sponge. Don't saturatethe material. Don't rub itroughly. As soon as you've cleaned the section,use a sponge to remove the suds. Using Solvent-Type Cleaner on Fabric First, see if you have to use solvent-type cleaner all. at Some spotsand stains will clean off better with just water and mild soap. If you need to usea solvent: 0 0 0 Rinse the section witha clean, wet sponge. Wipe off what's left with a slightly damp paper towel or cloth. Dry it immediately with a blow dryer or a heat lamp. 0 Gently scrape excesssoil from the trim material with a clean, dull knife scraper. Use very little cleaner, or light pressureand clean cloths(preferably cheesecloth). Cleaning should start at the outside of the stain, "feathering" toward the center. Keep changing to a clean section of the cloth. When you clean a stain from fabric, immediately dry the area with a blow dryer to help prevent a cleaning ring. (See the previous NOTICE.) 0 6-43