2009 Mercedes CLS-Class Owner's Manual - Page 64
2009 Mercedes CLS-Class Manual
Page 64 highlights
Safety and security Occupant safety Once top tether anchorage hook 3 is attached, the child restraint itself can be secured. X Install the child restraint system and tighten top tether strap 4 according to the child restraint manufacturer's instructions. After removing the child restraint system and the top tether strap 4. X Reinstall the anchorage ring cover 1. a lap/shoulder belt fits properly without a booster. Install child seat according to manufacturer's instructions. The child seat must be firmly attached to the right and left side anchors. An incorrectly mounted child seat may come loose during an accident which could result in serious injury or death to the child. Damaged or impact damaged child seats or child seat anchor fittings must be replaced. Non-LATCH-type child seats may also be used and can be installed using the vehicle's seat belt system. Install child seat according to the manufacturer's instructions. The LATCH-type anchors are covered with upholstery blends. Child seat anchors - LATCH-type This vehicle is equipped with two LATCH-type anchors (at each of the rear seats) for the installation of a LATCH-type child seat with matching mounting fittings. 1 Indicates the position of the anchors 2 Anchors X X Fold the upholstery blend upward to access the anchors 2. Install a LATCH-type child seat according to the manufacturer's instructions. A rigid connection is established between the child seat and the body of the vehicle. G Observe Safety notes, see page 59. G Warning! Children too big for a toddler restraint must ride in seats using regular seat belts. Position shoulder belt across chest and shoulder, not face or neck. A booster seat may be necessary to achieve proper seat belt positioning for children over 41 lbs until they reach a height where 62