2009 Mercedes CLS-Class Owner's Manual - Page 144
2009 Mercedes CLS-Class Manual
Page 144 highlights
Controls in detail Driving systems X Press button ÿ or è on the multifunction steering wheel repeatedly until the message TEL appears in the multifunction display. Press button s. The first number in the redial memory appears in the multifunction display. Press button j or k repeatedly until the desired number or name appears in the multifunction display. Press button s. The control system dials the selected phone number. Driving systems Introduction This section describes the following driving systems of your vehicle: RCruise maximum speed in the multifunction display are illuminated. X control and Distronic RDistance RAirmatic X warning function is only available with Distronic DC system X RParktronic The ABS, Adaptive Brake, BAS, EBP and ESP® driving safety systems are described in the "Safety and security" section (Y page 64). Cruise control The cruise control automatically maintains the speed you set for your vehicle. The use of the cruise control is recommended for driving at a constant speed for extended periods of time. The currently set speed or last set speed ("Resume" function) appears in the multifunction display for approximately 5 seconds. The corresponding cruise control speed segments from the selected speed to the vehicle G Warning! The cruise control is a convenience system designed to assist the driver during vehicle operation. The driver is and must always remain responsible for the vehicle's speed and for safe brake operation. Only use the cruise control if the road, traffic, and weather conditions make it advisable to travel at a constant speed. RThe use of the cruise control can be dangerous on winding roads or in heavy traffic because conditions do not allow safe driving at a constant speed. RThe use of the cruise control can be dangerous on slippery roads. Rapid changes in tire traction can result in wheel spin and loss of control. RDeactivate the cruise control when driving in fog. The "Resume" function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed. 142