2009 Mercedes CLS-Class Owner's Manual - Page 253
2009 Mercedes CLS-Class Manual
Page 253 highlights
Practical hints Where will I find ...? Jack G Warning! Only use the jack supplied with your vehicle to lift the vehicle briefly for wheel changes. If you use the jack for any other purpose, you or others could be injured, as the jack is designed only for the purpose of changing a wheel. When using the jack, observe the safety notes in the "Mounting the spare wheel" section and the notes on the jack. X Example illustration 1 Tool bag and jack 2 Collapsible wheel chock 3 Electrical air pump 4 Storage well casing X Take the jack from the vehicle tool kit (Y page 250). To access jack: Remove tool bag 1. 1 Tilt the plates upward 2 Fold the lower plate outward 3 Insert the plate X X X ! Always lower trunk floor before closing trunk. Collapsible wheel chock The collapsible wheel chock serves to secure the vehicle, e.g. while changing a wheel. X Take the collapsible wheel chock from the vehicle tool kit (Y page 250). Setting up: Tilt both plates upward 1. Fold the lower plate outward 2. Guide the tabs of the lower plate all the way into the openings of base plate 3. Storage position X For information on where to place wheel chocks when changing a wheel, see "Lifting the vehicle" (Y page 315). Turn the crank handle in the direction of arrow as far as it will go. Z 251