2012 Kawasaki Teryx4 750 4x4 Owners Manual - Page 101

2012 Kawasaki Teryx4 750 4x4 Manual

Page 101 highlights

MAINTENANCE AND ADJUSTMENT 99 the oil filter cartridge and replace it with a • Remove new one. j A. Gasket A. Oil Filter B. Oil Filter Wrench the engine oil drain plug with its gasket. • Install Tighten it to the specified torque. • Apply a thin film of oil to the gasket and tighten the oil filter to the specified torque. NOTE żReplace any damaged gaskets with new ones. Tightening Torque Engine Oil 20 N·m (2.0 kgf·m, 14.5 ft·lb) Drain Plug Oil Filter 18 N·m (1.8 kgf·m, 13 ft·lb) the engine up to the "H" (High) line on the dip• Fill stick with a good quality engine oil specified in the table. NOTE żRenewing the oil filter will be best-performed by your authorized dealer since engine bottom guard needs to be removed for access to the oil filter.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159

MAINTENANCE AND ADJUSTMENT
99
j
Remove the oil filter cartridge and replace it with a
new one.
A. Oil Filter
B. Oil Filter Wrench
Apply a thin film of oil to the gasket and tighten the
oil filter to the specified torque.
NOTE
°
Renewing the oil filter will be best-performed by
your authorized dealer since engine bottom guard
needs to be removed for access to the oil filter.
A. Gasket
Install the engine oil drain plug with its gasket.
Tighten it to the specified torque.
NOTE
°
Replace any damaged gaskets with new ones.
Tightening Torque
Engine Oil
Drain Plug
20 N·m (2.0 kgf·m, 14.5 ft·lb)
Oil Filter
18 N·m (1.8 kgf·m, 13 ft·lb)
Fill the engine up to the “H” (High) line on the dip-
stick with a good quality engine oil specified in the
table.