2014 Ducati Superbike 1199 Panigale R Owners Manual - Page 87

Menu 1: LAP time The LAP function is only available for the display layout with standard screen in TRACK mode. LAP function information is available when the function is active. When the LAP function is activated, the timer is displayed indicating "0'00''00" as well as the LAP number with first indication "LAP - - ". Since the motorcycle has a GPS installed, the "Start/Stop" command of the lap is sent by GPS. To allow the GPS to automatically identify the "Start/Stop" at every lap, the finish line coordinates must be saved by pressing the FLASH (3) button upon first crossing of the finish line. The lap timer starts with a tenth-of-a-second resolution (0'00''00) and the LAP number in progress is displayed; with every successive crossing of the finish line the number and time for the lap just completed is temporarily displayed, followed by the display of the lap timer again and the new lap number in progress. In addition, if there is a stored GPS finish line found within a radius of 15 km from the current position, the message LAP is replaced by the checkerboard flag symbol to tell the user that the finish line coordinates have been stored. The finish line coordinates remain stored even after a key-off, whereas coordinates stored as finish line are updated every time the FLASH (3) button is pressed, with TRACK screen active. If a new memorization is made in conditions of a stored finish line, the word LAP will appear first followed by the checkerboard flag again. If lap timer is active but vehicle is at standstill, lap timer is temporarily stopped after 5 seconds and it is displayed with the initial indication "0'00''00" and lap number "LAP - -". At the next "Start" command sent by the GPS (cross of finish line) the lap timer is reactivated again. . 85