2014 Ducati Superbike 1199 Panigale R Owners Manual - Page 52

The functions within the Setting MENU that can be modified by the user are the following: RIDING MODE customization: within this menu, rider can customize the following: - ABS setting (ABS) - Electronic suspension setting (DES) - Display settings (DISPLAY) - DQS ON/OFF (DQS) - DTC level (DTC) - Engine setting (ENGINE) - EBC level (EBC) - Reset to default factory settings (DEFAULT) - Engine rpm digital indication (RPM) Battery voltage (BATTERY) DDA (on/off - view - delete) PIN CODE (enter/change) Clock settings (CLOCK SETTING) Date settings (DATE) Display backlighting (BACK LIGHT) Units of measurement (Speed - Temperature Fuel consumption) UNIT LAP (view/delete/reset automatic settings) for filling the bar graph and indicating the corresponding figure 11 ("orange area"). The area for the 12000-12500 rpm range (warning area) is indicated on the display in red, used both for filling the bar graph and indicating the corresponding figure 12 ("red area"). Important During the first 600 mi (1000 km) (Break-in period), i.e. as long as the Odometer displays a value lower than or equal to 600 mi (1000 km), the "orange area" (pre-warning area on the display with orange used for bar graph filling and to indicate the corresponding figure) is displayed when engine reaches 6000 rpm. During this break-in period, it is not advisable to exceed 6000 rpm, so make sure the instrument panel does not display the "orange area" of the bar graph. After the break-in period, the "orange area" indicates and advises the rider to ride at lower revs when the engine is cold; the "orange area" position changes according to engine temperature as follows: from 8000 rpm with engine temperature lower than or equal to 104 °F (40 °C) - The area for the 11000-11900 rpm range (pre-warning area) is indicated on the display in orange, used both 50