2014 Ducati Streetfighter 848 Owners Manual - Page 91

2014 Ducati Streetfighter 848 Manual

Page 91 highlights

To adjust the position, proceed as follows: Loosen counter nut (4). Turn pedal stroke adjusting screw (5) until pedal is in the desired position. Tighten the check nut (4) to 2.3 Nm. Operate the pedal by hand to check that there is 0.05÷0.07 in (1.5÷2 mm) of freeplay before the brake bites. If not, adjust the length of the master cylinder pushrod as follows. Slacken the counter nut (6) on the pushrod. Screw the pushrod into the front fork (7) to increase the freeplay, or screw it out to reduce it. Tighten the check nut (6) to 7.5 Nm and check freeplay again. 6 7 5 4 fig. 56 90

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151

90
To adjust the position, proceed as follows:
Loosen counter nut (4).
Turn pedal stroke adjusting screw (5) until pedal is in
the desired position.
Tighten the check nut (4) to 2.3 Nm.
Operate the pedal by hand to check that there is
0.05÷0.07 in (1.5÷2 mm) of freeplay before the brake
bites.
If not, adjust the length of the master cylinder
pushrod as follows.
Slacken the counter nut (6) on the pushrod.
Screw the pushrod into the front fork (7) to increase
the freeplay, or screw it out to reduce it.
Tighten the check nut (6) to 7.5 Nm and check
freeplay again.
5
6
7
4
fig. 56