2014 Ducati Streetfighter 848 Owners Manual - Page 60

2014 Ducati Streetfighter 848 Manual

Page 60 highlights

DTC (Ducati Traction Control) setting function This function serves to set the sensitivity level for the DTC (Ducati Traction Control). To set the Traction Control sensitivity level, with the motorcycle stationary, enter the "Setup DTC" menu page. This page only appears in the menu once the Traction Control ECU has been activated (DTC ON). The Traction Control sensitivity level setting (L.1...L.8) is indicated on the left-hand side of the display. The sensitivity levels range from "1" to "8"; the higher the number, the greater the intervention of the Traction Control system (see following paragraph). Within this menu page, press reset button (14, fig. 14) for 3 seconds to access the level setting function. page 1: the display will show "LEVEL 1". If you wish to set this level, press RESET button (14, fig. 14) for 3 seconds; the instrument panel will automatically quit this page and return to the initial display, with the level setting indicated at the center. If instead you wish to set the next highest level, press button (2, fig. 19) "▼". page 2: the display will show "LEVEL 2". if you wish to set this level, press the reset button (14, fig. 14) for 3 seconds; the instrument panel will only if active Press RESET for 3 sec. Press "▼" Press "▲" Press RESET for 3 sec. Press "▼" Press "▲" Press RESET for 3 sec. Press "▼" Press "▲" Press RESET for 3 sec. fig. 37 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151

59
DTC (Ducati Traction Control) setting
function
This function serves to set the sensitivity level for the
DTC (Ducati Traction Control).
To set the Traction Control sensitivity level, with the
motorcycle stationary, enter the “Setup DTC” menu
page. This page only appears in the menu once the
Traction Control ECU has been activated (DTC ON).
The Traction Control sensitivity level setting
(L.1…….L.8) is indicated on the left-hand side of the
display. The sensitivity levels range from “1” to “8”;
the higher the number, the greater the intervention of
the Traction Control system (see following
paragraph).
Within this menu page, press reset button (14, fig.
14) for 3 seconds to access the level setting function.
page 1: the display will show “LEVEL 1“.
If you wish to set this level, press RESET button (14,
fig. 14) for 3 seconds; the instrument panel will
automatically quit this page and return to the initial
display, with the level setting indicated at the center.
If instead you wish to set the next highest level,
press button (2, fig. 19) “
”.
page 2: the display will show “LEVEL 2“.
if you wish to set this level, press the reset button
(14, fig. 14) for 3 seconds; the instrument panel will
fig. 37
Press RESET for 3 sec.
Press
Press
Press
Press
Press
Press
Press RESET for
3 sec.
Press RESET
for 3 sec.
Press RESET for
3 sec.
only if active