2013 Ducati Monster 696 Owners Manual - Page 67

This function is used to set the clock time. To set the clock, select the "SET" page from the menu. SETTING THE TIME Holding button (1,Fig. 14) pressed in position B " " for 3 seconds in this menu page gives access to the setup mode. When you access this function, the text "AM" flashes; if you press button (1,Fig. 14) in position B " " the text "PM" flashes; if you press button (1, Fig. 14)in position B " " mode will go back to previous setting (if it is 00:00, when toggling from "AM" to "PM", 12:00 will be displayed). Pressing button (1,Fig. 14) in position A " " accesses the hour setting mode; the hours start to flash. Each time you press the button in position B " " the digit will increase by 1 hour; if the button is held pressed down in position B " ", the digit will increase by 1 hour every second (when the button is held pressed, the hours do not flash). Clock setup - - pressing button (1,Fig. 14) in position A " " accesses the minute setting mode; the minutes start to flash. Each time you press the button in position B " ", the digit will increase by 1 minute. If you hold the switch down in position B " ", the count increases cyclically in steps of 1 minute every second. If the button is held depressed in position B " " for over 5 seconds, minutes will increase by 1 minute every 100 ms (while the button is held depressed in position B " " seconds do not flash). pressing the button in position A " " exits setup mode and the new time is displayed. 66