2013 Ford Taurus Owner Manual Printing 3 - Page 67

66 MyKey Optional Settings You can configure these settings while programming a MyKey or change them while using an admin key: • 80 mph (130 km/h) vehicle speed limit. Drivers receive visual warnings and an audible tone when they reach 80 mph (130 km/h). • 45, 55 or 65 mph (75, 90, or 105 km/h) vehicle speed warning. Drivers receive visual warnings and an audible tone when they exceed the preselected vehicle speed. • 45% of the maximum audio system output. The audio system displays a message when drivers attempt to exceed the volume limits. • AdvanceTrac, 911 Assist or Do not disturb features. Program the system to Always-on and these features, if your vehicle is equipped, cannot be turned off when drivers use a programmed MyKey. CREATING A MYKEY Use the information display to create a MyKey. 1. Insert the key you want to program into the ignition. With a push-button start (if equipped), put the Intelligent Access key in the backup slot; see the Starting and Stopping the Engine chapter for the backup slot location. 2. Turn the ignition on. 3. From the main menu within the information display, press OK or the > button to navigate through the various screens. Select Settings and then MyKey. 4. Press OK or the > button to select Create. 5. When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at your vehicle's next start. After the key is successfully programmed, make sure you label it so you can distinguish it from the admin keys. You can also program optional settings for the key(s). Refer to Programming/Changing Optional Settings. 2013 Taurus Owners Guide gf, 3rd Printing, December 2012 USA (fus)