2013 Ford Taurus Owner Manual Printing 3 - Page 186

Starting and Stopping the Engine 185 If you are unable to start your vehicle, do the following: 1. Locate the key backup slot in center console utility compartment. 2. With the buttons facing the rear of the vehicle and the key ring up, place the key into backup slot. 3. With the key in this position, press the brake pedal, then the button to switch the ignition on and start your vehicle. Stopping the Engine When Your Vehicle is Stationary 1. Move the transmission selector lever to position P. 2. Press the button once. Note: The ignition, all electrical circuits, warning lamps and indicators switch off. Stopping the Engine When Your Vehicle is in Motion WARNING: Switching off the engine when the vehicle is still moving will result in a loss of brake and steering assistance. The steering will not be locked, but higher effort will be required. When the ignition is switched off, some electrical circuits, warning lights and indicators may also be off. 1. Press and hold the button for one second, or press it three times within two seconds. 2. Move the transmission selector lever to position N and use the brakes to bring your vehicle to a safe stop. 3. When your vehicle has stopped, move the transmission selector lever to position P and switch the ignition off. Fast Restart The fast restart feature allows you to restart the engine within 20 seconds of switching it off, even if a valid key is not present. Within 20 seconds of switching the engine off, press the brake pedal and press the button. After 20 seconds have expired, you can no longer start the engine without the key present inside your vehicle. 2013 Taurus Owners Guide gf, 3rd Printing, December 2012 USA (fus)