Viper 320HV Owner Manual - Page 26

✂ Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet. ✂ QUICK REFERENCE GUIDE To arm using your remote: ■ Press of your transmitter for one second. When the system arms, you will hear a short siren sound, or chirp, and see the parking lights flash once. If the vehicle's power door locks are controlled by the system, the doors will lock. Disarming: ■ Press again. You will hear two chirps, and the parking lights will flash twice. If the power door locks are controlled by the system, the doors will unlock. Disarming without a transmitter: ■ Turn on the ignition. Press the Valet switch within 15 seconds. The system should now disarm. If it does not disarm, you may have waited too long to press the Valet switch; turn the ignition off and on and try again. Remote-controlled silent arm/disarm: ■ Press briefly before arming or disarming, and the confirmation chirp(s) will be eliminated for that one operation only. Panic Mode: ■ Press or for 1.5 seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for 30 seconds. To stop Panic Mode at any time, press on the transmitter again. To enter or exit Valet Mode with the Valet switch: ■ Turn the ignition to the ON position, then turn to the OFF position. Press and release the Valet switch within 10 seconds. Remote-controlled Valet: ■ You can also enter or exit Valet Mode by using the remote transmitter. First, open any vehicle door. Then press . Press . Press again. The status LED will light solidly if you have entered Valet Mode and will turn off if you have exited Valet Mode. © 2004 Directed Electronics, Inc. 23