Viper 320HV Owner Manual - Page 14
Valet™ mode using a transmitter
View all Viper 320HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
You can access Valet® Mode either manually or from the remote. To enter or exit Valet® Mode with the Valet® button: 1. Turn the ignition on. 2. Turn the ignition off. 3. Press and release the Valet® button within 10 seconds. DRW-35 The status LED will light solidly if you are entering Valet® Mode and will turn off if you are exiting Valet® Mode. ➜ Valet™ mode using a transmitter You can also enter or exit Valet® Mode by using the remote transmitter: 1. Open any vehicle door. 2. Press . 3. Press . 4. Press again. The status LED will light solidly if you have entered Valet® Mode and will turn off if you have exited Valet® Mode. © 2004 Directed Electronics, Inc. 11
11
You can access Valet® Mode either manually or from the remote.
To enter or exit Valet® Mode with the Valet® button:
1.
Turn the ignition on.
2.
Turn the ignition off.
3.
Press and release the Valet® button within 10
seconds.
The status LED will light solidly if you are entering Valet®
Mode and will turn off if you are exiting Valet® Mode.
Valet™ mode using a transmitter
You can also enter or exit Valet® Mode by using the remote
transmitter:
1. Open any vehicle door.
2. Press
.
3. Press
.
4. Press
again.
The status LED will light solidly if you have entered Valet®
Mode and will turn off if you have exited Valet® Mode.
➜
DRW-35
©
2004 Directed Electronics, Inc.