Viper 320HV Owner Manual - Page 13
Panic™ mode, Silent™ mode, Valet® mode
View all Viper 320HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
➜ Panic™ mode If you are threatened in or near your vehicle, you can press for 1.5 seconds to trigger Panic Mode on your security system and attract attention. The siren will sound and the parking lights will flash for 30 seconds. To stop Panic Mode at any time, press . Also, pressing and holding the button will activate the Panic Mode. ➜ Silent™ mode Use the remote-controlled silent arm/disarm to temporarily turn off the arm or disarm chirps by briefly pressing before pressing . The confirmation chirp(s) will then be eliminated for that one operation only. To permanently turn off the arm and disarm chirps, contact your installation dealer. NOTE: The warn away response to lighter impacts is bypassed if the system is armed using the silent arm/disarm. This ensures that the siren does not chirp in an environment where you do not want chirps to be emitted. The system is still capable of being triggered by heavier impacts; only the warn away response generated by light impacts is bypassed. ➜ Valet® mode Valet® Mode prevents your security system from arming and triggering either automatically or with the remote transmitter. In Valet® Mode, the system will not arm, but all convenience functions (door locks, trunk release, etc.) remain operational. This feature is useful when washing or servicing your vehicle. 10 © 2004 Directed Electronics, Inc.