Viper 320HV Owner Manual - Page 10

➜ Arming You can arm the security system by pressing for one second. When the system arms, the siren will chirp and the parking lights will flash once. If the power door locks are con- trolled by the system, the doors will also lock. Once armed, the status LED will flash once per second to indicate that the system is actively protecting your vehicle. If you hear a second chirp after arming and notice that the status LED is flashing in a grouped pattern, this signals Bypass Notification. Bypass Notification is described in detail in the Diagnostics section of this manual. If the vehicle is equipped with Comfort Closing of the windows/sunroof and this feature has been programmed ON the windows/sunroof will close immediately after the doors lock. The alarm system will not monitor the zone inputs for Bypass Notification, Warn away or Full trigger inputs until after the windows are closed to avoid any false triggering of the system while the window are in motion.. ➜ Arming without a transmitter Your security system can also be programmed for Passive Arming. With Passive Arming, the system automatically arms itself 30 seconds after the ignition has been turned off and the last protected entry has been closed. During the 30-second Passive Arming countdown, the status LED will flash twice as fast as it does when the system is armed. If the system is programmed for Passive Arming, care must be taken to prevent the © 2004 Directed Electronics, Inc. 7