URC URC-A6 Owners Manual - Page 19

More Favorite Channels You can also use the "A, B, C and D" buttons to program favorite channels. Each button can program up to 5 favorite channels (or a total of 20 button presses), but you're not limited to using these buttons for only that. You can record any series of button presses into a macro. This is great switching video or audio sources. Here is an example of how to program a macro on the "A" button with three favorite channels. We'll use "25, 50, and 75." STEP 1: Press the device you are getting channel control from. Ex. Cable. STEP 2: Press and hold the "A" button and "Mute" button at the same time until a device button lights up. STEP 3: Press "2". STEP 4: Press "5". STEP 5: Press "Select". STEP 6: Press "Stop". STEP 7: Press "5". STEP 8: Press "0". STEP 9: Press "Select". STEP 10: Press "Stop". STEP 11: Press "7". STEP 12: Press "5". STEP 13: Press "Select". STEP 14: Press "Stop". STEP 15: Press "Channel Up" to save macro. Note: Pressing the "Select" button just assures the quickest response from the Cable box. Pressing "Stop" allows you to program several favorite channels on one button. Now, the first press of the "A" button will change the channel to "25." The second, to "50" and the third, to "75." Then the sequence starts all over again. Page 19