TRENDnet TDM-E400 User's Guide - Page 71
Click the Bridging: Enable/Disable link., The System Mode displays
View all TRENDnet TDM-E400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 5. Configuring the WAN Interfaces 13. In the interface table, select all interface names on which you want to perform bridging and click . To enable bridging with your ISP, select the EoA interface and the LAN interface(s) (eth-0 and/or usb-0). You can enable bridging on an IP-enabled EoA interface; in this case, the same interface will be capable of handling both bridged and routed data packets. 14. Click the Bridging: Enable/Disable link. The System Mode page displays: Figure 24. System Mode Page You can also access the System Mode page from the task bar in the Home tab. 15. Click the Bridging: Enabled radio button (if not already selected), and then click . A page will briefly display to confirm your changes, and will return you to the Bridge Configuration page. 16. If you want the changes to be permanent, follow the instructions on page 46 to commit them. 71