TRENDnet TDM-E400 User's Guide - Page 65
Last Fail Cause, Security, Protocol, Login Name, No Valid PADO Recvd: The device initiated a PPoE
View all TRENDnet TDM-E400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 5. Configuring the WAN Interfaces Field Last Fail Cause DNS SDNS Security Protocol Login Name Description Indicates the action that ended the previous PPP session: o No Valid PADO Recvd: The device initiated a PPoE handshake but did not receive a packet in reply from the ISP. o No Valid PADS Recvd: After the initial handshake, the device did not receive a confirmation packet from the ISP. o Stopped by User: The user stopped the connection (for example, by changing the Web Configuration settings for the PPP interface.) o No Activity: The PPP communication timed out, in accordance with the timeout period specified on the PPP Configuration page. o Auth Failure: The ISP could not authorize the connection based on the user name and/or password provided. o PADT Recvd: The ISP issued a special packet type to terminate the PPP connection. o VC down: The Virtual Circuit between the device and the ISP is down. o Internal failure: A system software failure occurred. The IP address of the DNS server (located with your ISP) used on this PPP connection. The IP address of the secondary DNS server (located with your ISP) used on this PPP connection. The type of PPP security your ISP uses: PAP (Password Authentication Protocol) or CHAP (Challenge Handshake Authentication Protocol). The name you use to log in to your ISP each time this PPP connection is established. 65