Sony DWTP01/E4250 Product Information Document (Digirtal Wireless System Integ - Page 34
DWX Transmitter Series, DWX Receiver Series
![]() |
View all Sony DWTP01/E4250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Configuring a DWX System DWX Transmitter Series DWT-B01/E Digital Wireless Transmitter Compact and lightweight transmitter suitable for a wide range of input levels, from microphone level to line audio level. DWT-P01 Digital Wireless Transmitter The DWT-P01 is a plug-on transmitter that supports a wide range of audio input levels, from microphone level to line level. Use with a small, high-performance lavalier microphone equivalent to the ECM-77BC/9X widely used in broadcasting applications or K-1161 GTR adapter. Supplied accessories for various applications include soft case with belt clip, XLR input converter cable, etc. (48 V phantom power supply not supported) Two-stage switchable RF output power: 1 mW / 10 mW /50 mW Five continuous hours of operation with two AA-size alkaline batteries at the 10 mW power setting Allows direct connection of dynamic microphones and condenser microphones requiring 48 V phantom powering. Three-stage switchable RF output power: 1 mW / 10 mW / 50 mW Five continuous hours of operation with two AA-size alkaline batteries at the 10 mW power setting DWX Receiver Series DWR-R01D Digital Wireless Receiver The DWR-R01D is a 1U-size two-channel rack-mountable receiver with wide bandwidth coverage. Audio input connector (SMC9-4S) Connects the output plug from the optional lavalier microphone. This connector also accepts the input from another wired microphone connected through the supplied XLR cable, or the audio output from a mixer, etc. Battery compartment Accommodates two LR6 (size AA) alkaline batteries. (output) USB connector (Micro USB) Use this connector to connect an optional USB keyboard to carry out menu functions using key operations. By connecting the DWR-S01D to this connector with the supplied USB cable, you can exchange the encryption key for encrypted transmission function. Large OLED display and JOG dial on the unit make it easy to perform various operations quickly and precisely. 3 digital outputs in addition to 2-channel analog output.32 kHz - 96 kHz word sync input/output connector supports system connection for digital synchronization. Support for diversity reception enables dual antenna input/ cascaded output. 9 or 12 V DC power supply output for powering Sony UHF AN series active antennas. Built-in LAN (10/100) port allows configuration of a network system using the Remote Control Unit RMU-01 and Wireless Studio. Supplied Wireless Studio application supports monitoring and control of up to 82 transmitters. 34 Audio Equipment Selection
![](/manual_guide/products/sony-dwm0214-product-information-document-digirtal-wireless-integration-guide-046312a/34.png)