Sharp BP-50M36 Operating Manual - Page 855
Fax Settings
View all Sharp BP-50M36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 855 highlights
SETTING MODE►SYSTEM SETTINGS Fax Settings You can select the image send settings of fax functions. Condition Settings The fax settings can be enabled or disabled to suit the needs of your workplace. Resolution Setting You can select the resolution setting for faxes. Apply the Resolution Set when Stored Select this to use the resolution at which the fax was sent. If you do not select [Apply the Resolution Set when Stored], the image will be stored at the resolution specified in the pull-down menu. Factory default settings: Disable Dial Mode Setting Select the line type from the list. Auto Select Select this after the line has been connected to have the machine automatically detect whether your line is a pulse dial line or a tone dial line. (Set manually when using a 10 pps rotary dial.) Factory default settings: Tone Auto Wake Up Print When the [Power] button is "Off" (but the main power switch is "On") and a fax is received, this function activates the machine and prints the fax. When this function is disabled, received faxes are not printed until the [Power] button is switched "On". Factory default settings: Enable Pause Time Setting Changes the length of pauses inserted in fax numbers. If a hyphen (-) is entered when dialing or storing a fax number, a pause of 2 seconds is inserted. It can be set between 1 and 15 seconds, in every second. Factory default settings: 2 seconds Fax Dest. Confirmation Mode This setting specifies whether or not a destination verification message is displayed when sending a fax in order to prevent accidental transmission to the wrong destination. Factory default settings: Disable Remote Reception Number Setting You can set the machine to the fax reception mode by entering a one-digit number from the connected extension telephone and by tapping the key. This one-digit number is called the Remote Reception number, and it can be between 0 and 9. Factory default settings: 5 9-89