Sharp BP-50M36 Operating Manual - Page 431
Specifying The Original Scan Size In Paper
View all Sharp BP-50M36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 431 highlights
FACSIMILE►BASIC TRANSMISSION METHODS SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE When the original size is not standard (inch size or non-standard size) or is not detected correctly, manually specify the original size. When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. The image is sent in Mono2 only. In Easy mode 1 Tap the [Original] key. 2 Original Image Size Orientation Auto Tap the [Auto] key. OK Duplex Setup 1-Sided Book Tablet 3 Tap a key of the desired original size. After the settings are completed, tap If you are sending a long original, perform the setting in normal mode. 5-44
5-44
FACSIMILE
►
BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER
SIZE
When the original size is not standard (inch size or non-standard size) or is not detected correctly, manually specify the
original size.
In Easy mode
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only.
1
Tap the [Original] key.
2
Tap the [Auto] key.
3
Tap a key of the desired original size.
After the settings are completed, tap
If you are sending a long original, perform the setting in normal mode.
Original
Size
OK
Auto
Image
Orientation
Duplex Setup
1-Sided
Book
Tablet