Sharp BP-50M36 Operating Manual - Page 263
Load the tab paper., Place the original and tap the [Preview] key., Tap the [Start] key to start
View all Sharp BP-50M36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
COPIER►OTHER FUNCTIONS 4 Load the tab paper. When using the bypass tray, place the paper with the print side down. Place the paper so that the sides with the tabs enter the machine last. After loading tab paper into the bypass tray, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY (page 3-31)". Tab copying with a left binding Place the tab paper with the side 2 facing up, and the tab on the first sheet is on the near side. Tab copying with a right binding Place the tab paper with the side 2 facing up, and the tab on the first sheet is on the back side. The width of the tab paper can be as wide as 8-1/2" x 11" paper (8-1/2") plus 5/8" (or A4 width (210 mm) plus 20 mm). 5 Place the original and tap the [Preview] key. Place the original in the document feeder tray of the automatic document feeder, or on the document glass. AUTOMATIC DOCUMENT FEEDER (page 1-29) DOCUMENT GLASS (page 1-33) To cancel all settings: Tap the [CA] key. 6 Tap the [Start] key to start copying. 3-119