Sharp BP-50M36 Operating Manual - Page 19

BEFORE USING THE MACHINE►LOADING PAPER 4 Insert the paper into the tray. • Load the paper with the print side facing up. The stack must not be higher than the indicator line (maximum of 550 sheets). • Fan the paper well before loading it. If the paper is fed while overlapping, it may cause a paper jam. • After loading the paper, close the guides to the paper width not to leave the gap from the guides A and B. Do not load the paper as shown below. 5 Close the tray slowly. Push the tray into the machine slowly. Forcefully inserting the paper may cause skewed feeding and paper misfeeds. LOADING ENVELOPE IN TRAY 1 Load the paper with the copy and print side facing up. The diagram shows an example of printing on the front side. The maximum number of sheets (50) may not exceed the indicator line. Envelopes with triangular flaps cannot be used in tray 1. Cautions when placing envelopes • Removing curling • Ensure these are flat, containing no air • Ensure the four folded edges are pressed flat (for items with flaps, three edges) • Align on a flat surface • Before printing envelopes in tray 1, print a trial print to check the results. • If the envelope is not folded tightly, is warped or bent, it may cause misfeeds. 1-16