Sharp BP-50M36 Operating Manual - Page 1011
A Tray, Finisher, Or Other Peripheral Device, Installed On The Machine Cannot Be Used, The Image Is
View all Sharp BP-50M36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1011 highlights
TROUBLESHOOTING►GENERAL PROBLEMS A TRAY, FINISHER, OR OTHER PERIPHERAL DEVICE INSTALLED ON THE MACHINE CANNOT BE USED Check Have the peripheral devices that are installed on the machine been configured with the printer driver? Solution ■ Open the printer properties dialog box and click [Auto Configuration] on the [Options] tab. (Windows) If auto configuration cannot be executed, see the Software Setup Guide. THE IMAGE IS GRAINY Check Are the printer driver settings appropriate for the print job? Solution ■ Check the settings of the printer driver. When selecting print settings, select a print mode from [600dpi], [600dpi (High Quality)], or [1200dpi]*. When you need a very clear image, select [1200dpi]*. Windows: The resolution setting is selected in the [Image Quality] tab of the printer driver properties window. macOS: The resolution setting is configured in the [Printer Features] menu of the print window. * On the BP-50M26/BP-50M31/BP-50M36/BP-50M45/BP-50M55/BP-50M65, "1200 dpi" can not be used. THE IMAGE IS TOO LIGHT OR TOO DARK Check Is the overall print density too light? Does the image (particularly a photo) need correction? (Windows) Solution ■ Use the setting below to change the overall print density. Select "Settings (administrator)" - [System Settings] → [Image Quality Adjustment] → [Print Image Quality] → [Quick Image Quality Adjustment]. Set default setting [2] to [3 (Sharp)] to increase the overall density, or [1 (Smooth)] to decrease the overall density. ■ Check the settings of the printer driver. Correct brightness and contrast with [Image Adjustment] on the [Image Quality] tab of the printer driver. Use these settings to make simple corrections in a case such as when image editing software is not installed on your computer. 10-32