Sharp BP-50M31 Operating Manual - Page 182
Tap the [Staple / Punch] key., Select punching and set the position.
![]() |
View all Sharp BP-50M31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
COPIER►BEFORE USING THE MACHINE AS A COPIER 1 Tap the [Staple / Punch] key. COPY MODE (page 3-3) • Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized. • SPECIFYING THE ORIENTATION OF THE ORIGINAL (page 3-26) 2 Select punching and set the position. After the settings are completed, tap [OK]. In normal mode • You can select the offset output checkbox easy removal from the output tray. to have each set of output be offset from the previous set to enable • To change the output tray, tap the [Output Tray] key, and select the output destination. 3-38
![](/manual_guide/products/sharp-bp50m26-operating-manual-4b37c5b/182.png)
3-38
COPIER
►
BEFORE USING THE MACHINE AS A COPIER
1
Tap the [Staple / Punch] key.
COPY MODE (page 3-3)
• Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
•
SPECIFYING THE ORIENTATION OF THE ORIGINAL (page 3-26)
2
Select punching and set the position.
After the settings are completed, tap [OK].
In normal mode
• You can select the offset output checkbox
to have each set of output be offset from the previous set to enable
easy removal from the output tray.
• To change the output tray, tap the [Output Tray] key, and select the output destination.