Sharp AR-C360P AR-C360P EFI Job Management Guide - Page 167

77-167 Previewing, editing, and merging jobs already been rasterized (RIP and Hold), or they have been printed and their raster data has been routed back to the RIP area (Print and Hold). Note:Raster jobs in the RIP area that are waiting to print (Icon 2) cannot be manipulated by job commands. Print area The job icon in the Print area is as follows: Print area icon 1 What it indicates PostScript or PCL data only-raster data has been deleted How long you see the job Until the job limit is reached The Print area, also referred to as the Printed queue, contains jobs that have already been printed. These jobs were assigned the Print destination (white printer icon in the Spool or RIP areas) without any Hold instructions; therefore, they all have white icons. Note:A job row that appears in light red indicates that an error occurred while printing the job. To see the error, double-click anywhere in the row. While it is printing, a job consists of PostScript or PCL and raster data. The raster data in RAM is not cleared until memory is needed to rasterize the next job. As long as the raster data is intact, the job can be reprinted from the Printed queue. Printed jobs are represented by a white PostScript icon (Icon 1). If the job was printed from a held raster job (in the RIP area), the raster data in the RIP area remains and can be used to reprint the job after the raster data has been cleared from the Printed queue. Previewing, editing, and merging jobs Fiery WebSpooler includes two thumbnail windows that allow you to preview and edit raster data. You can use the thumbnail Sharp AR-C360P EFI Job Management Guide - 167