Sennheiser MOMENTUM Free M2 IEBT SW - Page 31

Clearing previously paired devices, M2 IEBT SW | 29

Page 31 highlights

Troubleshooting Leaving the Bluetooth transmission range Wireless calling and streaming are only possible in the Bluetooth transmission range of your smartphone. The transmission range largely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of sight, the transmission range of most smartphones and Bluetooth devices is up to 10 meters. If the headphones leave the Bluetooth transmission range of the smartphone, the sound quality deteriorates and you hear the voice prompt "lost connection". At this point, the connection breaks down completely. You can re-establish the connection if you re-enter the Bluetooth transmission range and you hear the voice prompt "connected". XX To re-establish the connection, press the multifunction button. Clearing previously paired devices 1. Set the headphones to pairing mode, see page 14. The LED flashes blue and red. The headphones are in pairing mode. 2. Press the Volume/track + button for 2 seconds. The LED flashes purple 3 times. The headphones are permanently disconnected from all devices and immediately go into pairing mode. 1 4s 1s 1s 2 2s M2 IEBT SW | 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

M2 IEBT SW | 29
Troubleshooting
Leaving the Bluetooth transmission range
Wireless calling and streaming are only possible in the
Bluetooth
transmission range of your smartphone. The transmission range largely
depends on environmental conditions such as wall thickness, wall
composition etc. With a free line of sight, the transmission range of most
smartphones and
Bluetooth
devices is up to 10 meters.
If the headphones leave the
Bluetooth
transmission range of the
smartphone, the sound quality deteriorates and you hear the voice prompt
“lost connection”. At this point, the connection breaks down completely.
You can re-establish the connection if you re-enter the
Bluetooth
transmission range and you hear the voice prompt ”connected”.
X
To re-establish the connection, press the multifunction button.
Clearing previously paired devices
1. Set the headphones to pairing mode, see page 14.
The LED flashes blue and red. The headphones are in pairing mode.
2. Press the Volume/track + button for 2 seconds.
The LED flashes purple 3 times. The headphones are permanently
disconnected from all devices and immediately go into pairing mode.
1
2
1s
1s
4s
2s