Ricoh SP C352DN Driver Installation Guide - Page 18

3. Installing the Printer Driver for a Network Connection 2. The software license agreement appears in the [License Agreement] dialog box. After reading the agreement, click [I accept the agreement.], and then click [Next]. 3. Select the printer driver you want to use, and then click [Next]. 4. Select [Specify a new port], and then click [Next]. 5. Select [LPR Port], and then click [Next]. 6. Enter the printer name or IP address in the [Name or address of server providing lpd:] box. 7. Enter "lp" in the [Name of printer or print queue on that server:] box, and then click [OK]. 8. Select the [Printer Name] check box of the printer model you want to use. 9. Specify the user code, default printer, and shared printer as necessary. 10. Click [Continue]. Follow the instructions on the screen. Using the WSD port • The WSD port can be used under Windows Vista/7/8/8.1/10, or Windows Server 2008/2008 R2/2012/2012 R2. • You can connect to the printer only if both the printer and computer are on the same network segment, or "Network discovery" is enabled. For details, see Windows Help. Windows Vista, Windows Server 2008 1. On the [Start] menu, click [Network]. 2. Right-click the printer's icon, and then click [Install]. 3. Click [Locate and install driver software (recommended)]. 4. Click [Browse my computer for driver software (advanced)]. 5. Insert the provided CD-ROM into the computer's CD-ROM drive. If the [AutoPlay] dialog box appears, click [Close]. 6. Click [Browse...], and then specify the location of the INF file. If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations: • PCL 5c 32-bit driver D:\X86\DRIVERS\PCL5C\X86\(Language)\DISK1 64-bit driver D:\X64\DRIVERS\PCL5C\X64\(Language)\DISK1 • PCL 6 32-bit driver D:\X86\DRIVERS\PCL6\X86\MUI\DISK1 16