Ricoh IM C530FB User Guide - Page 225

See Using the Protection Function to, Prevent the Misuse of Addresses, User

Page 225 highlights

When a Message Appears While Using the Scanner Function Message Cause Solution and reference "Memory storage device not detected. Insert the device." An SD card or USB flash memory device is not recognized properly. • Use an SD card with a maximum capacity of 32 GB or a USB flash memory that supports USB 2.0. • An SD card or USB flash memory may not be recognized in some situations such as if the media is inserted before the application starts. Insert the SD card or USB flash memory after the application has started. • Do not use an SD card or USB flash memory that is not secured or protected by a password. • Use media that is formatted for FAT16 or FAT32. • Try another SD card or USB flash memory. • Turn off the power of the machine, wait for 10 seconds or more after confirming that the main power indicator is turned off, and then turn on the power. "Programmed. Cannot program the destination(s) that is not programmed in the address book." A folder specified by Manual Entry is included among the programmed destinations. Register the destination in the address book of the machine, and then register it to a program. "Programmed. Cannot program the folder destination(s) with protection code(s)." A destination specified with a protection code is included among the programmed destinations. • You cannot program a destination specified with a protection code. Specify this destination individually. • To program this destination, cancel the protection code and then register the destination to a program. See "Using the Protection Function to Prevent the Misuse of Addresses", User Guide (Full Version). 223

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288

Message
Cause
Solution and reference
"Memory storage device
not detected. Insert the
device."
An SD card or USB flash
memory device is not
recognized properly.
Use an SD card with a maximum
capacity of 32 GB or a USB flash
memory that supports USB 2.0.
An SD card or USB flash memory may
not be recognized in some situations such
as if the media is inserted before the
application starts. Insert the SD card or
USB flash memory after the application
has started.
Do not use an SD card or USB flash
memory that is not secured or protected
by a password.
Use media that is formatted for FAT16 or
FAT32.
Try another SD card or USB flash
memory.
Turn off the power of the machine, wait
for 10 seconds or more after confirming
that the main power indicator is turned
off, and then turn on the power.
"Programmed. Cannot
program the
destination(s) that is not
programmed in the
address book."
A folder specified by
Manual Entry is
included among the
programmed
destinations.
Register the destination in the address book of
the machine, and then register it to a program.
"Programmed. Cannot
program the folder
destination(s) with
protection code(s)."
A destination specified
with a protection code is
included among the
programmed
destinations.
You cannot program a destination
specified with a protection code. Specify
this destination individually.
To program this destination, cancel the
protection code and then register the
destination to a program.
See "Using the Protection Function to
Prevent the Misuse of Addresses", User
Guide (Full Version).
When a Message Appears While Using the Scanner Function
223